It is currently 28 Mar 2024, 10:47

All times are UTC [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: 29 Apr 2011, 22:19 
Offline
BDCA Member

Joined: 25 Dec 2010, 18:05
Posts: 2
Hi All,
I recommend taking a look at a you-tube clip featuring the Nene Valley Railway breakdown crane operating recently at their mixed traffic gala. It features our site administrator David Withers oiling up and driving. Well worth a look.

http://www.youtube.com/watch?v=hvBubz9bdag


Top
 Profile  
 
PostPosted: 29 Apr 2011, 23:44 
Offline
Site Admin

Joined: 15 Dec 2010, 22:30
Posts: 298
Location: North Cambridgeshire, UK
Thanks, Andy.

I was driving up to the point where the chains were lowered ready for the boiler lift, then Richard took over and I became the slinger. David O'Connell was the banksman throughout.

I returned to the footplate towards the end of the session, to stow the hook and jib, and that's when I first heard the rattling that turned out to be caused by a loose piece of metal in the LH cylinder as reported at length elsewhere. :(


Top
 Profile  
 
PostPosted: 01 May 2011, 22:06 
Offline

Joined: 23 Dec 2010, 00:07
Posts: 384
Location: Poole, Dorset
Nice clip, thanks for bringing it to our attention.

David, around the eight minute mark it looks very much as though the crane is (literally) "chock a block" with the block sheaves in contact with those in the job nose - is this an optical illusion?

It is nice to see this fine crane working, and the video is first class.


Top
 Profile  
 
PostPosted: 02 May 2011, 10:35 
Offline
Site Admin

Joined: 15 Dec 2010, 22:30
Posts: 298
Location: North Cambridgeshire, UK
I, too, noticed the close proximity of the sheaves when viewing the film! I was on Slinger duty at the time and it's something I couldn't be aware of from where I was working (I'm the chap in the faded orange overalls).

You can see, when the jib is being raised, that the sheaves aren't in fact touching but are a bit too close. The Banksman was out of position, standing on the wagon almost underneath the block rather than locating himself where he could see both the apparatus and the Driver. He's normally an excellent banksman and it's a shame his one misdemeanour was caught on film!

When Banksman myself, I aim for around four feet as a minimum between the block & jib nose sheaves, though I expect three feet would be acceptable. Much less than this I think is liable to put a kink the rope.

I'll bring up the subject at our next crane team's Mutual Improvement session!


Top
 Profile  
 
PostPosted: 25 Jun 2011, 19:09 
Offline
BDCA Member

Joined: 28 Jan 2011, 10:53
Posts: 93
Location: Milton Keynes, city of roundabouts
Looking good Sat June 25th.


Attachments:
File comment: Saturday June25th
cranenvr.JPG
cranenvr.JPG [ 131.66 KiB | Viewed 23404 times ]
Top
 Profile  
 
PostPosted: 25 Jun 2011, 20:23 
Offline
Site Admin

Joined: 15 Dec 2010, 22:30
Posts: 298
Location: North Cambridgeshire, UK
You might have done the signwriting on the jib and cab sides while you were there, Rob!


Top
 Profile  
 
PostPosted: 26 Jun 2011, 19:27 
Offline
BDCA Member

Joined: 28 Jan 2011, 10:53
Posts: 93
Location: Milton Keynes, city of roundabouts
I was wondering if it had a face painted on it at the boiler end whilst in disguise as 'Rocky' the breakdown crane what with all the other Thomas events going on !


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group