It is currently 14 Dec 2024, 04:49

All times are UTC [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: 11 Sep 2023, 05:50 
Offline
Registered User

Joined: 10 Sep 2023, 03:29
Posts: 3
While the 75 t SWL cranes built by Cowans Sheldon and used on the UK network are well known to this forum, what is perhaps less well known is that two cranes of the same design, but with a different carriage and relieving bogies to suit a narrow gauge network, were bought by New Zealand Railways (now KiwiRail) around 1979. Of these, one survives (C-S #31658) and is currently being overhauled and extensively modified for use as a multi-tasker type infrastructure crane.


Top
 Profile  
 
PostPosted: 11 Sep 2023, 07:07 
Offline
BDCA Member

Joined: 16 Feb 2012, 17:58
Posts: 102
Location: Near Redruth, Cornwall
Hi Jack
Have you any photos, it would be good to see what she looks like.


Top
 Profile  
 
PostPosted: 11 Sep 2023, 21:51 
Offline
Registered User

Joined: 10 Sep 2023, 03:29
Posts: 3
Hello Mick,

The photo is of how it was before overhaul and modification. The modification retains the original 2 section 60 t SWL boom, but gives the option of an interchangeable 3 section 20 t SWL rated for use fully extended horizontally giving the ability to lift 20 t at 13 m measured off the short end headstock. This work is currently in progress.

Perhaps of interest, the NZ version of the UK 75 tonners was downrated to 60 t mainly for reasons of stabiliser capacity, the slewing works being identical to the UK cranes. There remains the option to upgrade to 75 t capacity should the need arise.

More photos to come once it looks more like a crane and less like a dismantled shell.


Attachments:
File comment: EL6002 erecting traction overhead structures 2012
EL6002-November 2012.JPG
EL6002-November 2012.JPG [ 187.63 KiB | Viewed 39535 times ]
Top
 Profile  
 
PostPosted: 12 Sep 2023, 07:50 
Offline
BDCA Member

Joined: 16 Feb 2012, 17:58
Posts: 102
Location: Near Redruth, Cornwall
Thanks for that Jack.


Top
 Profile  
 
PostPosted: 16 Sep 2023, 17:57 
Offline
BDCA Member

Joined: 26 Dec 2010, 19:06
Posts: 263
What's the gauge? 3ft?

_________________
Bryan

http://www.nymr-pway.co.uk/


Top
 Profile  
 
PostPosted: 18 Sep 2023, 22:38 
Offline
Registered User

Joined: 10 Sep 2023, 03:29
Posts: 3
Hello Bryan - the gauge is 3' 6" (1067 mm).


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group